Looking for Marun Petrochemical products from Iran? Contact us or send message on WhatsApp.
Introduction
Call2Supply is an independent supplier and export coordination partner for selected products manufactured by Marun Petrochemical Company (MPC). We help international buyers, importers, distributors, and industrial manufacturers source Marun MEG, HDPE, and PP according to their required grades, technical specifications, and order quantities.
Our role covers product sourcing, commercial coordination, technical documentation, and export shipment arrangements. We work with buyers to identify suitable products and agree on supply conditions based on their destination and purchasing requirements. Call2Supply operates independently and is not the official distributor or sales representative of Marun Petrochemical Company.
This guide introduces Marun Petrochemical Company, its production facilities, the main products we supply, and the technical considerations buyers should review before purchasing.
About Marun Petrochemical Company
Marun Petrochemical Company is a major Iranian petrochemical producer located in Khuzestan Province, southwestern Iran.
According to the company’s official brochure, its facilities operate across two main locations:
- Ethane Recovery Plant: Located near Ahvaz, this facility recovers ethane and heavier hydrocarbon components from natural gas.
- Main Petrochemical Complex: Located at Site 2 of the Petrochemical Special Economic Zone near Bandar Imam Khomeini Port in Mahshahr.
The recovered feedstock is transported to the main complex, where it supports the company’s olefin production operations. The olefin plant has an annual production capacity of approximately 1.1 million metric tons of ethylene and 200,000 metric tons of propylene.
These olefins are used as feedstocks for downstream production units, including HDPE, PP, and ethylene oxide/ethylene glycol.
The company’s published brochure also reports the following annual capacities:
| Production Unit | Annual Capacity |
|---|---|
| Ethylene | 1,100,000 MT |
| Propylene | 200,000 MT |
| HDPE | 300,000 MT |
| PP | 300,000 MT |
Marun’s integrated production structure connects olefin manufacturing with downstream polymer and chemical production, making it an important supplier in Iran’s petrochemical industry.
Marun Petrochemical Products We Supply
Call2Supply focuses on sourcing three product groups from Marun Petrochemical Company: Mono Ethylene Glycol (MEG), High-Density Polyethylene (HDPE), and Polypropylene (PP).
Each product has different technical characteristics and industrial applications. Selecting the correct grade is therefore an important part of the purchasing process.
1. Marun Petrochemical MEG (Mono Ethylene Glycol)
Mono Ethylene Glycol (MEG) is a colourless, transparent liquid produced by Marun Petrochemical Company. It is an important chemical raw material used in polyester manufacturing and several other industrial applications.
MEG is primarily used in:
- Polyester fibre production
- PET resin manufacturing
- Textile and synthetic fibre industries
- Antifreeze and industrial coolant formulations
- Chemical manufacturing processes
For manufacturers, MEG purity and impurity levels are important purchasing considerations because they can affect the performance and consistency of downstream production processes.
Marun MEG Technical Specifications
The following values are taken from Marun Petrochemical Company’s published product brochure.
| Parameter | Specification |
|---|---|
| Appearance | Colourless, transparent |
| Purity | 99.8 wt% min |
| DEG | 0.08 wt% max |
| Water | 0.08 wt% max |
| Colour (Pt-Co) | 5 max |
| Specific Gravity (20/20°C) | 1.1151–1.1156 |
| Boiling Range (5% vol.) | 196°C min |
| Boiling Range (95% vol.) | 199°C max |
| Aldehydes (as formaldehyde) | 8 mg/kg max |
| Acidity (as acetic acid) | 10 mg/kg max |
| Iron (as Fe) | 0.1 mg/kg max |
| Inorganic Chlorides (as Cl) | 0.05 mg/kg max |
| Ash | 50 mg/kg max |
These are published product values. Buyers should confirm the applicable specifications against the current Technical Data Sheet (TDS) and Certificate of Analysis (COA) for the supplied batch.
MEG Packaging and Delivery Terms
Call2Supply can arrange Marun MEG supply in the following packaging options:
- PE Drums
- IBC Tanks
Available delivery terms include FOB, CFR, and FCA, subject to the agreed shipment arrangements and destination.
For product details and purchasing inquiries, visit our Mono Ethylene Glycol (MEG) product page.
2. Marun Petrochemical HDPE (High-Density Polyethylene)
High-Density Polyethylene (HDPE) is a thermoplastic polymer known for its high strength-to-density ratio, chemical resistance, and mechanical durability.
Marun Petrochemical operates an HDPE production unit with an annual capacity of 300,000 metric tons. According to its official brochure, the plant can produce 21 different grades for various industrial applications.
Marun HDPE grades are used in the production of:
- Plastic films and packaging materials
- Bottles and industrial containers
- Chemical storage tanks
- High-pressure pipes
- Cable insulation
- Household and hygiene products
- High-impact fibres
Examples of Marun HDPE Grades
The following grades and technical values are listed in the manufacturer’s brochure.
| Grade | Density (ISO 1183) | MFI at 190°C / 5 kg | MFI at 190°C / 21.6 kg | Main Application |
|---|---|---|---|---|
| EX4 | 0.956 | 0.28 | 8 | Film extrusion, refuse bags and carrier bags |
| EX4 HS | 0.957 | 0.22 | 7.5 | Film extrusion and carrier bags |
| EX5 | 0.949 | 0.28 | 8 | Carrier bags, wrapping films and sheets |
| EX5 HS | 0.950 | 0.22 | 7.5 | Film extrusion, wrapping films and sheets |
Density is expressed in g/cm³ and MFI in g/10 min. These are brochure-listed values; the current grade TDS should be checked before confirming an order.
How to Select the Right Marun HDPE Grade
HDPE grade selection depends on the processing method and final application.
For example, film manufacturers generally review melt flow index and density when selecting a resin for carrier bags, wrapping films, and packaging sheets. Pipe manufacturers and blow-moulding producers require grades with different processing and mechanical characteristics.
Buyers should provide their target application and required technical properties when requesting a quotation.
You can review our available HDPE product range or contact our team for Marun HDPE sourcing inquiries.
3. Marun Petrochemical PP (Polypropylene)
Polypropylene (PP) is a versatile thermoplastic polymer manufactured from propylene. It is widely used in packaging, textiles, automotive components, household products, and industrial applications.
Marun Petrochemical has an annual PP production capacity of 300,000 metric tons. Its production portfolio includes homopolymer, random copolymer, and heterophasic copolymer grades.
The main industrial applications of Marun PP include:
- BOPP film production
- Injection-moulded household products
- Textile fibres and yarns
- Food packaging
- Automotive components
- Pipes and industrial products
- Medical and technical applications
Examples of Marun PP Grades
| Grade | Polymer Type | MFI (g/10 min) | Main Application |
|---|---|---|---|
| S 38 F | Homopolymer | 2.0 | BOPP films and general packaging |
| T 30 G | Homopolymer | 3.2 | Injection moulding, caps and small containers |
| C 30 S | Homopolymer | 6.0 | Film yarn, monofilament and technical applications |
| V 30 G | Homopolymer | 16 | Injection moulding and compounding |
| EPD 60 R | Random Copolymer | 0.4 | Blow moulding, pipes and industrial profiles |
| EPQ 30 M | Random Copolymer | 0.8 | Extrusion, blow moulding and automotive applications |
| EP1 X 30 F | Heterophasic Copolymer | 8 | Cast and water-quenched blown film |
| EP2 Z 29 G | Heterophasic Copolymer | 25 | Injection-moulded containers and thin-wall packaging |
PP MFI Test Conditions
The MFI values shown in Marun’s brochure are measured according to ISO 1133 at:
- Temperature: 230°C
- Test Load: 2.16 kg
These conditions are important when comparing PP grades because MFI values measured under different test temperatures or loads are not directly comparable.
Marun also identifies Hifax high-impact polypropylene copolymer grades in its company brochure, which are associated with automotive applications.
When sourcing Marun PP, buyers should specify the required polymer type, grade, MFI, and intended processing method.
Why Source Marun Petrochemical Products Through Call2Supply?
Call2Supply operates as an independent supplier and export coordination partner for selected products manufactured by Marun Petrochemical Company.
We work with international buyers to coordinate the commercial and logistical aspects of sourcing from Iranian petrochemical producers.
Our services include:
Product Sourcing
We coordinate supply inquiries for Marun MEG, HDPE, and PP according to the buyer’s product requirements and requested quantities.
Grade Identification
We help buyers identify suitable grades by reviewing their technical requirements, intended applications, and available manufacturer specifications.
Technical Documentation
Available product documents, including TDS and COA, can be coordinated for buyer review as part of the inquiry and purchasing process.
Commercial Coordination
We discuss pricing, order quantities, packaging requirements, and applicable delivery terms with buyers.
Export Coordination
We coordinate export documentation and shipment arrangements according to the agreed commercial conditions and destination requirements.
Call2Supply does not claim to be Marun Petrochemical’s official distributor or representative. Our role is to independently coordinate product sourcing and export supply for international customers.
Export and Shipment Arrangements
When purchasing Marun Petrochemical products from Iran, buyers should consider the product type, packaging, order quantity, destination, and delivery terms.
Packaging
For MEG, Call2Supply can arrange PE drums and IBC tanks. Packaging arrangements for polymer products should be confirmed for the requested grade and shipment.
Delivery Terms
FOB, CFR, and FCA are available delivery terms, subject to the product, destination, and agreed commercial arrangements.
The applicable port, named place, and allocation of responsibilities should be clearly specified in the quotation and sales contract.
Order Quantity and Availability
Order quantities and current availability depend on the selected product, grade, and supply conditions. These details should be confirmed before order confirmation.
Export Documentation
Depending on the transaction and destination, export documentation may include:
- Commercial Invoice
- Packing List
- Certificate of Analysis (COA)
- Technical Data Sheet (TDS)
- Certificate of Origin (where applicable)
- Other documents required by the buyer or destination authorities
Call2Supply coordinates the applicable documentation requirements during the purchasing process.
How to Request a Quote for Marun Petrochemical Products
International buyers interested in Marun Petrochemical MEG, HDPE, or PP can send their purchasing requirements to Call2Supply.
To help us review your inquiry, please provide:
- Product name and required grade
- Required quantity
- Destination country and port
- Preferred packaging, where applicable
- Required delivery term (FOB, CFR, or FCA)
- Technical or documentation requirements
Our commercial team will review the inquiry and coordinate the relevant sourcing and shipment arrangements.
Request a Quote for Marun Petrochemical Products
Submit your purchasing requirements through our Online Order Registration Form or contact the Call2Supply commercial team.
Frequently Asked Questions
1. What products does Marun Petrochemical Company produce?
Marun Petrochemical Company produces a range of petrochemical products, including MEG, DEG, TEG, HDPE, PP, ethylene, and propylene. Its production facilities include olefin, ethylene oxide/ethylene glycol, and polymer units.
2. Can I source Marun Petrochemical MEG through Call2Supply?
Yes. Call2Supply coordinates the sourcing and export supply of Marun MEG for international buyers. Available packaging options include PE drums and IBC tanks. Buyers can contact us with their required quantity and destination for a quotation.
3. What are the main technical specifications of Marun MEG?
According to the manufacturer’s published brochure, Marun MEG has a minimum purity of 99.8 wt%, with a maximum DEG content of 0.08 wt% and maximum water content of 0.08 wt%. Buyers should confirm the current batch specifications through the applicable COA.
4. What HDPE grades does Marun Petrochemical produce?
Marun’s published brochure lists 21 HDPE grades. Examples include EX4, EX4 HS, EX5, and EX5 HS, which are used mainly in film extrusion and packaging applications.
5. What types of polypropylene does Marun Petrochemical produce?
Marun produces homopolymer, random copolymer, and heterophasic copolymer PP grades. These grades are used in applications such as BOPP films, injection moulding, textiles, packaging, pipes, and automotive components.
6. What delivery terms are available for Marun Petrochemical products through Call2Supply?
Call2Supply can coordinate supply under FOB, CFR, and FCA terms, depending on the product, destination, and agreed commercial conditions.
7. Is Call2Supply an official distributor of Marun Petrochemical Company?
No. Call2Supply operates as an independent supplier and export coordination partner for selected Marun Petrochemical products. We coordinate product sourcing and commercial arrangements for international buyers without claiming official distributorship or representation.
